HT-500A / HT-500B
Model | HT-500A | HT-500B |
---|---|---|
Stroke | ||
X Axis | 800mm | |
Y Axis | 800mm | |
Z Axis | 800mm | |
Spindle Nose To Table Center | 150~950 mm | 135~935 mm |
Spindle Nose To Table Surface | 120~920 mm | |
Feed | ||
3-Axes Rapid Feed (X/Y/Z) | 36000 / 36000 / 36000 mm/mm | |
3-Axes Acceleration (X/Y/Z) | 1 / 1 / 1 G | |
Cutting Feed | 20000mm/min | |
Ballscrew Diameter & Pitch | D45 x P16 / 12 / 16 | |
Rotary Table | ||
Table Size | 500 x 500 mm | |
Max. Permissible Loading | 600kg | |
Min. Index Degree | 0.001˚ | |
Thread Hole Spec.(Dia.xthread Pit.xDepthxPit.) | M16 x 2 x 33 x 100mm | |
Rotate time | 3.6 sec / rev. | |
Rotary Table Clamp Force | 350 kg-m | |
Pallet Clamp Force | 2000kg | |
Headstock | ||
Spindle Driven Method | Built-in Driven | |
Spindle Taper | BT-40 | BT-50 |
Spindle Motor | (F):18.5/22kW (cont./15min) ; (M): 22/30kW (cont./15min) |
|
Spindle OD | 70mm | 100 mm |
Spindle speed | 10000 r.p.m. | 6000 r.p.m. |
ATC | ||
ATC Type | Arm Type | |
Tool Number | 40 | |
Max. Tool Weight | 11kg | 20kg |
Max. Tool Diameter (With Adj. Tool/Without Adj. Tool) |
95 / 200 mm | 125 / 250 mm |
Max. Tool Length | 400mm | |
Tool Exchange Time (T-T) | 1.5 sec | 3 sec |
Tool Exchange Time (C-C) | 4.5 sec | 6 sec |
APC Type | ||
APC Type | Rotary Exchange | |
Pallet Number | 2 | |
Max. Fixture Diameter | 750mm | |
Max. Fixture Height | 900mm | |
Pallet Surface To Ground | 1150mm | |
Pallet Exchange Time | 11sec | |
General | ||
Machine Weight | 13500kg | 14000kg |
Machine Dimension (W x D x H) | 3100 x 6100 x 3000mm | |
Positioning Accuracy | ±0.004mm/300mm | |
Repeatable Accuracy | ±0.003mm | |
Required air Pressure | 6kg/cm2 |
Standard Feature | Optional Feature | Controller Option |
---|---|---|
|
|
|