HT-500A / HT-500B
| Model | HT-500A | HT-500B |
|---|---|---|
| Stroke | ||
| X Axis | 800mm | |
| Y Axis | 800mm | |
| Z Axis | 800mm | |
| Spindle Nose To Table Center | 150~950 mm | 135~935 mm |
| Spindle Nose To Table Surface | 120~920 mm | |
| Feed | ||
| 3-Axes Rapid Feed (X/Y/Z) | 36000 / 36000 / 36000 mm/mm | |
| 3-Axes Acceleration (X/Y/Z) | 1 / 1 / 1 G | |
| Cutting Feed | 20000mm/min | |
| Ballscrew Diameter & Pitch | D45 x P16 / 12 / 16 | |
| Rotary Table | ||
| Table Size | 500 x 500 mm | |
| Max. Permissible Loading | 600kg | |
| Min. Index Degree | 0.001˚ | |
| Thread Hole Spec.(Dia.xthread Pit.xDepthxPit.) | M16 x 2 x 33 x 100mm | |
| Rotate time | 3.6 sec / rev. | |
| Rotary Table Clamp Force | 350 kg-m | |
| Pallet Clamp Force | 2000kg | |
| Headstock | ||
| Spindle Driven Method | Built-in Driven | |
| Spindle Taper | BT-40 | BT-50 |
| Spindle Motor | (F):18.5/22kW (cont./15min) ; (M): 22/30kW (cont./15min) |
|
| Spindle OD | 70mm | 100 mm |
| Spindle speed | 10000 r.p.m. | 6000 r.p.m. |
| ATC | ||
| ATC Type | Arm Type | |
| Tool Number | 40 | |
| Max. Tool Weight | 11kg | 20kg |
|
Max. Tool Diameter (With Adj. Tool/Without Adj. Tool) |
95 / 200 mm | 125 / 250 mm |
| Max. Tool Length | 400mm | |
| Tool Exchange Time (T-T) | 1.5 sec | 3 sec |
| Tool Exchange Time (C-C) | 4.5 sec | 6 sec |
| APC Type | ||
| APC Type | Rotary Exchange | |
| Pallet Number | 2 | |
| Max. Fixture Diameter | 750mm | |
| Max. Fixture Height | 900mm | |
| Pallet Surface To Ground | 1150mm | |
| Pallet Exchange Time | 11sec | |
| General | ||
| Machine Weight | 13500kg | 14000kg |
| Machine Dimension (W x D x H) | 3100 x 6100 x 3000mm | |
| Positioning Accuracy | ±0.004mm/300mm | |
| Repeatable Accuracy | ±0.003mm | |
| Required air Pressure | 6kg/cm2 | |
| Standard Feature | Optional Feature | Controller Option |
|---|---|---|
|
|
|
